Where HSN 7208 53 30 Sits
Use the eight-digit code on the bill of entry, the shipping bill and, where your turnover requires it, on the GST invoice. The first four digits are the heading; the last four narrow it to this line.
GST Rate on HSN 7208 53 30
GST on goods is fixed by the entries of Notification No. 9/2025-Central Tax (Rate), in force from 22 September 2025 and amended up to 30 April 2026. The entries below are the ones that reach this code. Match the goods to the description in the entry before you invoice.
| GST rate | Entry | Codes named | Goods covered by the entry |
|---|---|---|---|
| 18% | Schedule II, S. No. 267 | 7208 to 7212 | All flat-rolled products of iron or non-alloy steel |
| 18% | Schedule II, S. No. 639 | Any Chapter | Goods which are not specified in Schedule I, III, IV, V, VI or VII (residual entry) |
Goods that fall under no specific entry take the residual entry, unless they are exempt under the exemption notification issued with the rate notification.
Customs Duty on HSN 7208 53 30
An import pays basic customs duty at the tariff rate, social welfare surcharge at 10% of that duty (unless exempted for the goods), and IGST at the GST rate on the value plus both duties.
- Basic customs duty at
- Social welfare surcharge, 10% of the duty
- IGST at on value plus both
- Total duty and tax
- As a share of the value
Standard rates only: no exemption notification, anti-dumping or safeguard duty, or trade-agreement rate is applied, and the surcharge is taken at 10% although some goods are exempted from it. A registered importer takes credit of the IGST.
Export Policy and RoDTEP for HSN 7208 53 30
Schedule 2 of ITC(HS) 2022 marks this tariff item Free. The code is not listed in Appendix 4R, so RoDTEP is not available on it.
Other Codes Under HSN 7208
| Tariff item | Description | Basic customs duty |
|---|---|---|
| 7208 10 00 | In coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 25 10 | PlatesOf a thickness of 4.75 mm or more | 15% |
| 7208 25 20 | Universal platesOf a thickness of 4.75 mm or more | 15% |
| 7208 25 30 | SheetsOf a thickness of 4.75 mm or more | 15% |
| 7208 25 40 | StripOf a thickness of 4.75 mm or more | 15% |
| 7208 25 90 | OtherOf a thickness of 4.75 mm or more | 15% |
| 7208 26 10 | PlatesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 26 20 | Universal platesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 26 30 | SheetsOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 26 40 | StripOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 26 90 | OtherOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 27 10 | PlatesOf a thickness of less than 3 mm | 15% |
| 7208 27 20 | Universal platesOf a thickness of less than 3 mm | 15% |
| 7208 27 30 | SheetsOf a thickness of less than 3 mm | 15% |
| 7208 27 40 | StripOf a thickness of less than 3 mm | 15% |
| 7208 27 90 | OtherOf a thickness of less than 3 mm | 15% |
| 7208 36 10 | PlatesOf a thickness exceeding 10 mm | 15% |
| 7208 36 20 | Universal platesOf a thickness exceeding 10 mm | 15% |
| 7208 36 30 | SheetsOf a thickness exceeding 10 mm | 15% |
| 7208 36 40 | StripOf a thickness exceeding 10 mm | 15% |
| 7208 36 90 | OtherOf a thickness exceeding 10 mm | 15% |
| 7208 37 10 | PlatesOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 37 20 | Universal platesOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 37 30 | SheetsOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 37 40 | StripOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 37 90 | OtherOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 38 10 | PlatesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 38 20 | Universal platesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 38 30 | SheetsOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 38 40 | StripOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 38 90 | OtherOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 39 10 | PlatesOf a thickness of less than 3 mm | 15% |
| 7208 39 20 | Universal platesOf a thickness of less than 3 mm | 15% |
| 7208 39 30 | SheetsOf a thickness of less than 3 mm | 15% |
| 7208 39 40 | StripOf a thickness of less than 3 mm | 15% |
| 7208 39 90 | OtherOf a thickness of less than 3 mm | 15% |
| 7208 40 10 | PlatesNot in coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 40 20 | Universal platesNot in coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 40 30 | SheetsNot in coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 40 40 | StripNot in coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 40 90 | OtherNot in coils, not further worked than hot-rolled, with patterns in relief | 15% |
| 7208 51 10 | PlatesOf a thickness exceeding 10 mm | 15% |
| 7208 51 20 | Universal platesOf a thickness exceeding 10 mm | 15% |
| 7208 51 30 | SheetsOf a thickness exceeding 10 mm | 15% |
| 7208 51 40 | StripOf a thickness exceeding 10 mm | 15% |
| 7208 51 90 | OtherOf a thickness exceeding 10 mm | 15% |
| 7208 52 10 | PlatesOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 52 20 | Universal platesOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 52 30 | SheetsOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 52 40 | StripOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 52 90 | OtherOf a thickness of 4.75 mm or more but not exceeding 10 mm | 15% |
| 7208 53 10 | PlatesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 53 20 | Universal platesOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 53 30 | SheetsOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 53 40 | StripOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 53 90 | OtherOf a thickness of 3 mm or more but less than 4.75 mm | 15% |
| 7208 54 10 | PlatesOf a thickness of less than 3 mm | 15% |
| 7208 54 20 | Universal platesOf a thickness of less than 3 mm | 15% |
| 7208 54 30 | SheetsOf a thickness of less than 3 mm | 15% |
| 7208 54 40 | StripOf a thickness of less than 3 mm | 15% |
| 7208 54 90 | OtherOf a thickness of less than 3 mm | 15% |
| 7208 90 00 | Other | 15% |
- The item-wise import policy (Free, Restricted or Prohibited) of ITC(HS) Schedule 1.
- Exemption notifications, anti-dumping and safeguard duties, and preferential rates under trade agreements. The duty shown is the tariff rate.
- The GST exemption notification. Goods exempt under it pay no GST even if a rate entry names the code.
Official documents behind this page
- Notification No. 9/2025-Central Tax (Rate), 17 September 2025GST rate Schedules I to VI, in force from 22 September 2025, as amended by Notification No. 19/2025-Central Tax (Rate) of 31 December 2025 (Schedule VII omitted from 1 February 2026) and No. 01/2026 of 30 April 2026.
- Customs Tariff, First ScheduleCBIC Customs Tariff as on 30 June 2024, with the First Schedule amendments of the Finance (No. 2) Act, 2024, the Finance Act, 2025 and the Finance Act, 2026 applied.
- ITC(HS) 2022, Schedule 2, Export PolicyDGFT: the export policy and policy condition of each tariff item.
- Appendix 4R and Appendix 4RE, RoDTEP ScheduleDGFT, with effect from 10 October 2024 (Notification No. 32/2024-25); the 2026 changes are in Notifications 60, 66 and 74 of 2025-26 and 41 of 2026-27.
Disclaimer: This guide is general information based on the law and notifications in force when it was last updated. It is not professional advice for your case — rates, thresholds and due dates change, so check the current position with the official source before you act on it.