List of goods
Goods in Design Class 09-07
- Including only closing means for packaging.
- "Attachments" means, for example, dispensing and dosing devices incorporated in containers and detachable atomizers.
| ID No. | Article |
|---|---|
| 101623 | Bottle caps |
| 101625 | Bottle caps incorporating brushes |
| 101628 | Bottle fasteners |
| 101617 | Bottle stoppers |
| 101633 | Clips [closing means] for packaging |
| 101627 | Closures for aerosol containers |
| 101624 | Closures for containers |
| 101616 | Coopers' bungs |
| 101618 | Cork stoppers |
| 101619 | Dispensing stoppers |
| 104965 | Fasteners for packaging |
| 101630 | Lead stamps or seals for packaging containers |
| 101622 | Measuring stoppers |
| 101629 | Muselets [wire closures] for bottles |
| 101626 | Nozzles for aerosol containers |
| 101632 | Perfusion caps |
| 101621 | Pourer stoppers |
| 101631 | Sealing capsules for bottles |
| 101614 | Sealing rings for packaging containers |
| 101613 | Spigots [cooperage] |
| 101612 | Spray caps for aerosol containers |
| 101620 | Stoppers with built-in spraying device |
No rows match — clear the filter to see all.
Words in square brackets explain the article; they are part of the indication.
Class 9
Other Subclasses of Class 9
| Subclass | Articles covered | Listed goods |
|---|---|---|
| 09-01 | Bottles, flasks, pots, carboys, demijohns, and pressurized containers | 19 |
| 09-02 | Storage cans, drums and casks | 9 |
| 09-03 | Boxes, cases, containers, tin cans | 40 |
| 09-04 | Hampers, crates and baskets | 5 |
| 09-05 | Bags, sachets, tubes and capsules | 26 |
| 09-06 | Ropes and hooping materials | 15 |
| 09-07 | Closing means and attachments | 22 |
| 09-08 | Pallets and platforms for forklifts | 3 |
| 09-09 | Refuse and trash containers and stands therefor | 16 |
| 09-10 | Handles and grips for the transport or handling of packages and containers | 4 |
| 09-99 | Miscellaneous | 5 |
No rows match — clear the filter to see all.
Filing in India
Using Class 09-07 in a Design Application
The Designs Office classifies articles by the current edition of the Locarno Classification (rule 10(1), Designs Rules, 2001). The application in Form 1 must state the class and the article to which the design is applied.
- Name the article in the words of the list where they fit, and give the class and subclass.
- One application covers one class. To register the same design in another class of article, file a separate application in that class.
- If the class is in doubt, the Controller decides it, in consultation with the applicant where required.
Official documents behind this page
- WIPO, Locarno Classification, 15th EditionIn force from 1 January 2025: classes, subclasses, explanatory notes and the list of goods. Source: World Intellectual Property Organization (WIPO), which holds the copyright in the Classification.
- Designs Rules, 2001, rule 10(1), as substituted by the Designs (Amendment) Rules, 2021Articles are classified as per the current edition of the Locarno Classification published by WIPO.
- Designs Act, 2000, section 5(3), and Designs Rules, 2001, rule 11(2) and (3)A design is registered in one class; the application states the class and the article; the same design in another class needs a separate application.
Disclaimer: This guide is general information based on the law and notifications in force when it was last updated. It is not professional advice for your case — rates, thresholds and due dates change, so check the current position with the official source before you act on it.